The parking space line of the underground garage is matched with yellow sidelines on both sides of the lane, and the white guide arrows on the ground can guide vehicles to pass.
Garage marking is generally divided into the following types:
1)Underground garage marking - hot melt reflective marking paint
The standard size of the parking space is 2.5mx5m, 2.5mx5.5m.
The construction process of hot-melt marking parking spaces: set line-brush primer on the ground-Use Hot-melt machine to push line.
The hot-melt marking paint is a quick-drying type, which can be opened to traffic in 5-10 minutes in summer and 1 minute in winter.
2)Cold paint- manual painting marking parking space
The size of the parking space is 2.5mx 5m and 2.5mx 5.5m.
Cold paint marking method: Determine the location of the parking space- Tape the edges of the lines - Mix paint and add thinner (or primer) - Manual roller painting.
Cold paint marking takes 30-60 minutes to open to traffic.
3)Marking the parking space line on the epoxy floor
It is not advisable to use the hot melt marking paint on the epoxy floor, because the hot melt paint requires a high temperature of more than 100 degrees, and the epoxy floor is easy to burn, so it is not advisable. The epoxy floor should be used with masking tape. Masking paper is not easy to remain on the epoxy floor after painting.
